On the last post I told that I’m working on Cypress TrueTouch(tm) touchscreen driver for mainline inclusion.
So to work in a driver first you need to compile a Linux (or Android) kernel. Since I don’t have a fully functional Linux kernel for the Nook Color, I’m developing against an Android kernel.
I want to document how to build your own Android kernel for two reasons. First someone could find it useful. Second, I wanted to document the process for myself. I context switch more than I would like and when I comeback to something I didn’t do in a few days, I have to remember what are the exact commands to build the uImage, what is the defconfig file I use to build each kernel, etc. This happens even more with my hobbyists projects since I don’t work with them on a daily basis.
So these are the steps to build a custom Android kernel for your Nook Color:
1- Installing CyangenMod (CM7) on an SD card:
First you have to decide if you want to install your kernel on your boot partition of your nand memory or using an external SD card. I prefer to only install stable software on my nand so I did an CM7 installation on an SD card and used that for development.
To install a CM7 on your SD card first download and gunzip the generic sd card image.
$ wget http://nook.handhelds.ru/sdimage/generic-sdcard-v1.3.img.gz
$ gunzip generic-sdcard-v1.3.img.gz
Then insert your SD card and copy the image to your SD card:
$ dd if=generic-sdcard-v1.3.img of=/dev/sdX bs=1024
Where X is the block device name for your SD card. To know which block device is associated with your SD card, insert your card and look the kernel log messages with dmesg for example.
After done with writing eject and insert again your SD card on your computer. Download a nightly build of CM7 for the Nook from http://download.cyanogenmod.com/?device=encore I’m using -153 but I guess that a newer or older should work either.
$ wget http://download.cyanogenmod.com/get/cm_encore_full-153.zip
One the file has been downloaded, copy it to the SD card. There should be only one partition on the SD.
$ mount /dev/sdX1 /media/boot
$ cp cm_encore_full-153 /media/boot
That’s all, now unmount the SD card, insert it on the Nook and power off. The generic image will find and update file and automatically start CM7 installation. The process will re-partition your SD card and copy all the necessary files in each of them (x-loader MLO, uBoot u-boot.bin, kernel image and ramdisk in the boot partition, binaries and libraries in the rootfs partition, etc).
Once the installation is complete the Nook will power off and you have a fully functional CM7 installation on your SD card. The Nook Color has boot sequence when the SD card has higher precedence than the nand memory. If the SD card is inserted, the Nook will attempt to boot from there. So with the SD inserted, just turn on again the Nook an CM7 will boot from there.
That is, you now have a system to test your newer kernel.
2- Instal a ARM cross-compiling tool-chain
Since the Nook has an ARM processor and it is unlikely that your host machine is ARM base, you will need to install an ARM cross-compiling tool-chain to compile ARM Android images.
You can install different cross tool-chains both from source code and using pre-compiled packages for your host machine distribution. For example to install Linaro’s GCC cross tool-chain you can use the following command on Debian and Debian-based distros (such as Ubuntu):
$ apt-get install gcc-arm-linux-gnueabi
3- Obtaining and compiling an Android kernel
Now you need CM7 Android kernel, this can be found in Dalingrin github repository.
$ git clone https://github.com/dalingrin/nook_kernel.git
Now you have to checkout a local branch for your work:
$ cd nook_kernel
$ git checkout -b devel origin/encore-32
Now you have a local branch devel to do your kernel development.
Do all the modifications you wish to the Android kernel and to compile your kernel first generate a .config file from the Nook Color defconfig file:
$ make ARCH=arm CROSS_COMPILE=arm-linux-gnueabi- omap3621_evt1a_defconfig
This will generate a .config file that contains all the symbols needed to compile Nook Color’s board file and needed drivers. You can customize the build with:
$ make ARCH=arm CROSS_COMPILE=arm-linux-gnueabi- menuconfig
Once your kernel compilation is customized you can generate the kernel image with the following command:
$ make ARCH=arm CROSS_COMPILE=arm-linux-gnueabi- uImage
Once it finish compiling, the uImage is located in arch/arm/boot/uImage.
The last step is to copy the uImage on the SD card. I prefer to mount the SD boot partition in the Nook Color using ssh or adb commands and copy the uImage using scp, but this setup will be explained in other article. Another option is to remove the SD card from the Nook, insert on your host machine, mounting the boot partition and copy the image:
$ mount /dev/sdX1 /media/boot
$ cp arch/arm/boot/uImage /media/boot
That is, now you can insert the SD card on your Nook Color and boot your customized Android kernel.